FMC+ Programmer

Overview

A web-based GUI application that enables reading and programming various FMC+ loopback modules accoreding to VITA 57.1/57.4 specification. The application runs on a Raspberry Pi SBC that both serves the web app as well as performs all of the low-level interfacing (GPIO, I2C) w/ the FMC+ loopback module.

Getting Started

The web-based GUI can be accessed on a host PC using Samtec Device Connect (SDC). Refer to SDC Getting Started Section, for details on scanning and viewing a device.

Supported Loopback Boards

REF-194194-01
REF-197618-01
REF-197693-01
REF-200772-XX-01
REF-210144-01