https://samtec-ash.com/app/index.html Overview A Samtec Active Device consists of a single board computer (SBC) such as a RaspberryPi running a web-based application comprised of a number of software services on top of a lightweight, IoT-geared OS (Balena OS). One common service is Samtec Device Share which is used to communicate with Samtec Device Connect. A web-server service is also running on the device which serves the web-based application GUI. From a PC, Samtec Device Connect is then able to discover the device, retrieve device info (such as name, app type, etc), perform quick actions (such as blink, update), as well as display the web-app. Hugo en-us Fri, 05 Jul 2019 10:17:35 -0400 https://samtec-ash.com/app/fireflyevaluator/index.html Wed, 03 Apr 2019 10:09:01 -0400 https://samtec-ash.com/app/fireflyevaluator/index.html Overview A web-based GUI application that enables scanning, controlling, and monitoring FireFly™️ modules. The application runs on a Raspberry Pi SBC that both serves the web app as well as performs all of the low-level interfacing (GPIO, I2C) w/ the FireFly. Getting Started The web-based GUI can be accessed on a host PC using Samtec Device Connect (SDC). First, the Raspberry Pi must be connected to the same network as the host PC. The device can be connected in the following ways: https://samtec-ash.com/app/fmcprogrammer/index.html Wed, 03 Apr 2019 10:09:01 -0400 https://samtec-ash.com/app/fmcprogrammer/index.html Overview A web-based GUI application that enables reading and programming various FMC+ loopback modules accoreding to VITA 57.1/57.4 specification. The application runs on a Raspberry Pi SBC that both serves the web app as well as performs all of the low-level interfacing (GPIO, I2C) w/ the FMC+ loopback module. Getting Started The web-based GUI can be accessed on a host PC using Samtec Device Connect (SDC). Refer to SDC Getting Started Section, for details on scanning and viewing a device. https://samtec-ash.com/app/public/index.html Fri, 05 Jul 2019 10:17:35 -0400 https://samtec-ash.com/app/public/index.html Public app images can be downloaded below for free. These public app versions are identical to app images sent with eval kits except they don’t support over-the-air (OTA) updates. Instead, to perform an update, simply download and flash the latest app image from the table below. Installation 1. Download App Image Download the desired app image from the table below.